Listen Modules¶
Listen Option¶
The listen option defines for which ports, addresses and network
protocols ejabberd will listen and what services will be run on them.
Each element of the list is an associative array with the following
elements:
-
Port number. Optionally also the IP address and/or a transport protocol.
-
Listening module that serves this port.
-
Options for the TCP socket and for the listening module.
For example:
listen:
-
port: 5222
module: ejabberd_c2s
ip: 127.0.0.1
starttls: true
-
port: 5269
module: ejabberd_s2s_in
transport: tcp
The port number defines which port to listen for incoming connections. It can be a Jabber/XMPP standard port or any other valid port number.
The IP address can be represented as a string. The socket will listen
only in that network interface. It is possible to specify a generic
address ("0.0.0.0" for IPv4 or "::" for IPv6), so ejabberd will listen
in all addresses. Depending on the type of the IP address, IPv4 or IPv6
will be used. When the IP address is not specified, it will listen on
all IPv4 network addresses.
Note that on some operating systems and/or OS configurations, listening on "::" will mean listening for IPv4 traffic as well as IPv6 traffic.
Some example values for IP address:
-
"0.0.0.0"to listen in all IPv4 network interfaces. This is the default value when no IP is specified. -
"::"to listen in all IPv6 network interfaces -
"10.11.12.13"is the IPv4 address10.11.12.13 -
"::FFFF:127.0.0.1"is the IPv6 address::FFFF:127.0.0.1/128
The transport protocol can be tcp or udp. Default is tcp.
Summary of Listen Modules¶
The available modules, their purpose and the options allowed by each one are:
ejabberd_c2s¶
Handles c2s connections.
Options: access, cafile, ciphers, dhfile, max_fsm_queue, max_stanza_size, protocol_options, shaper, starttls, starttls_required, tls, tls_compression, tls_verify, zlib.
ejabberd_s2s_in¶
Handles incoming s2s connections.
Options: cafile, ciphers, dhfile, max_fsm_queue, max_stanza_size, protocol_options, shaper, tls, tls_compression.
ejabberd_service¶
Interacts with an
external component
(as defined in the Jabber Component Protocol
(XEP-0114).
Options: access, cafile, certfile, check_from, ciphers, dhfile, global_routes, hosts, max_fsm_queue, max_stanza_size, password, protocol_options, shaper, shaper_rule, tls, tls_compression.
ejabberd_sip¶
Handles SIP requests as defined in
RFC 3261.
For details please check the ejabberd_sip and mod_sip sections.
General listener options: certfile, tls.
ejabberd_stun¶
Handles STUN/TURN requests as defined in
RFC 5389 and
RFC 5766.
For the specific module options, please check the
ejabberd_stun section:
auth_realm,
auth_type,
server_name,
turn_ip,
turn_max_allocations,
turn_max_permissions,
turn_max_port,
turn_min_port,
use_turn.
General listener options: certfile, shaper, tls,
ejabberd_http¶
Handles incoming HTTP connections.
With the proper request handlers configured, this serves HTTP services like ACME, API, BOSH, CAPTCHA, Fileserver, OAuth, Upload, WebAdmin, WebSocket, XMP-RPC.
Options: cafile, ciphers, custom_headers, dhfile, protocol_options, request_handlers, tag, tls, tls_compression, and the trusted_proxies top-level option.
mod_mqtt¶
Support for MQTT requires configuring mod_mqtt both in the
listen and the
modules sections.
Check the mod_mqtt modules options.
Check the advanded documentation in MQTT Support.
Listen options: max_fsm_queue, max_payload_size, tls, tls_verify.
ejabberd_stun¶
ejabberd is able to act as a stand-alone STUN/TURN server
(RFC 5389/RFC 5766.
In that role ejabberd helps clients with ICE
(RFC 5245 or Jingle ICE
(XEP-0176 support to
discover their external addresses and ports and to relay media traffic
when it is impossible to establish direct peer-to-peer connection.
The specific configurable options are:
tls: true|false: If enabled, certfile option must be set, otherwise ejabberd will
not be able to accept TLS connections. Obviously, this option makes
sense for tcp transport only. The default is false.
certfile: Path: Path to the certificate file. Only makes sense when tls is set.
use_turn: true|false: Enables/disables TURN (media relay) functionality. The default is
false.
turn_ip: String: The IPv4 address advertised by your TURN server. The address should
not be NAT’ed or firewalled. There is not default, so you should set
this option explicitly. Implies use_turn.
turn_min_port: Integer: Together with turn_max_port forms port range to allocate from. The
default is 49152. Implies use_turn.
turn_max_port: Integer: Together with turn_min_port forms port range to allocate from. The
default is 65535. Implies use_turn.
turn_max_allocations: Integer|infinity: Maximum number of TURN allocations available from the particular IP
address. The default value is 10. Implies use_turn.
turn_max_permissions: Integer|infinity: Maximum number of TURN permissions available from the particular IP
address. The default value is 10. Implies use_turn.
auth_type: user|anonymous: Which authentication type to use for TURN allocation requests. When
type user is set, ejabberd authentication backend is used. For
anonymous type no authentication is performed (not recommended for
public services). The default is user. Implies use_turn.
auth_realm: String: When auth_type is set to user and you have several virtual hosts
configured you should set this option explicitly to the virtual host
you want to serve on this particular listening port. Implies
use_turn.
shaper: Atom: For tcp transports defines shaper to use. The default is none.
server_name: String: Defines software version to return with every response. The default
is the STUN library version.
Example configuration with disabled TURN functionality (STUN only):
listen:
...
-
port: 3478
transport: udp
module: ejabberd_stun
-
port: 3478
module: ejabberd_stun
-
port: 5349
module: ejabberd_stun
certfile: /etc/ejabberd/server.pem
...
Example configuration with TURN functionality. Note that STUN is always enabled if TURN is enabled. Here, only UDP section is shown:
listen:
...
-
port: 3478
transport: udp
use_turn: true
turn_ip: 10.20.30.1
module: ejabberd_stun
...
You also need to configure DNS SRV records properly so clients can
easily discover a STUN/TURN server serving your XMPP domain. Refer to
section
DNS Discovery of a Server
of RFC 5389 and section
Creating an Allocation
of RFC 5766 for details.
Example DNS SRV configuration for STUN only:
_stun._udp IN SRV 0 0 3478 stun.example.com.
_stun._tcp IN SRV 0 0 3478 stun.example.com.
_stuns._tcp IN SRV 0 0 5349 stun.example.com.
And you should also add these in the case if TURN is enabled:
_turn._udp IN SRV 0 0 3478 turn.example.com.
_turn._tcp IN SRV 0 0 3478 turn.example.com.
_turns._tcp IN SRV 0 0 5349 turn.example.com.
ejabberd_sip¶
SIP Configuration¶
ejabberd has built-in SIP support. To activate this feature,
add the ejabberd_sip listen module, enable
mod_sip module
for the desired virtual host, and configure DNS properly.
To add a listener you should configure ejabberd_sip listening module
as described in Listen section.
If option tls is specified,
option certfile
must be specified as well, otherwise incoming TLS connections
would fail.
Example configuration with standard ports (as per
RFC 3261):
listen:
...
-
port: 5060
transport: udp
module: ejabberd_sip
-
port: 5060
module: ejabberd_sip
-
port: 5061
module: ejabberd_sip
tls: true
certfile: /etc/ejabberd/server.pem
...
Note that there is no StartTLS support in SIP and
SNI support is
somewhat tricky, so for TLS you have to configure different virtual
hosts on different ports if you have different certificate files for
them.
Next you need to configure DNS SIP records for your virtual domains.
Refer to RFC 3263 for the
detailed explanation. Simply put, you should add NAPTR and SRV records
for your domains. Skip NAPTR configuration if your DNS provider doesn't
support this type of records. It’s not fatal, however, highly
recommended.
Example configuration of NAPTR records:
example.com IN NAPTR 10 0 "s" "SIPS+D2T" "" _sips._tcp.example.com. example.com IN NAPTR 20 0 "s" "SIP+D2T" "" _sip._tcp.example.com. example.com IN NAPTR 30 0 "s" "SIP+D2U" "" _sip._udp.example.com.
Example configuration of SRV records with standard ports (as per
RFC 3261:
_sip._udp IN SRV 0 0 5060 sip.example.com. _sip._tcp IN SRV 0 0 5060 sip.example.com. _sips._tcp IN SRV 0 0 5061 sip.example.com.
Note on SIP usage¶
SIP authentication does not support SCRAM. As such, it is not possible
to use mod_sip to authenticate when ejabberd has been set to encrypt
password with SCRAM.
ejabberd_http_ws¶
This module enables XMPP communication over Websocket connection as
described in RFC 7395.
Enabling Websocket support¶
To enable this module it must have handler added to request_handlers
section of ejabberd_http listener:
listen:
...
-
port: 5280
module: ejabberd_http
request_handlers:
...
/xmpp: ejabberd_http_ws
...
...
This module can be configured by using those options that should be placed in general section of config file: websocket_origin, websocket_ping_interval, websocket_timeout.
Discovery¶
You also need to configure DNS SRV records properly so clients can easily discover Websocket service for your XMPP domain. Refer to XEP-0156.
Example DNS TXT configuration for Websocket:
Testing Websocket¶
A test client can be found on Github: Websocket test client
ejabberd_xmlrpc¶
Handles XML-RPC requests to execute API commands. It is configured as a request handler in ejabberd_http.
By default there is no restriction to who can execute what commands, so it is strongly recommended that you configure restrictions using API Permissions.
This is the minimum configuration required to enable the feature:
Example Python script:
import xmlrpclib
server = xmlrpclib.Server('http://127.0.0.1:4560/');
params = {}
params["host"] = "localhost"
print server.registered_users(params)
This example configuration adds some restrictions:
listen:
-
port: 5281
ip: "::"
module: ejabberd_http
request_handlers:
/api: mod_http_api
/xmlrpc: ejabberd_xmlrpc
api_permissions:
"some XMLRPC commands":
from: ejabberd_xmlrpc
who:
- ip: 127.0.0.1
- user: user1@localhost
what:
- registered_users
- connected_users_number
With that configuration, it is possible to execute two specific commands using
ejabberd_xmlrpc, with two access restrictions. Example Python script:
import xmlrpclib
server = xmlrpclib.Server('http://127.0.0.1:5281/xmlrpc')
LOGIN = {'user':'user1',
'server':'localhost',
'password':'mypass11',
'admin':True}
def calling(command, data):
fn = getattr(server, command)
return fn(LOGIN, data)
print calling('registered_users', {'host':'localhost'})
It's possible to use OAuth for authentication instead of plain password, see OAuth Support.
In ejabberd 20.03 and older, it was possible to configure ejabberd_xmlrpc as a
listener, see the old document for reference and example configuration:
Listening Ports.
Just for reference, there's also the old
ejabberd_xmlrpc documentation.
Examples¶
For example, the following simple configuration defines:
-
There are three domains. The default certificate file is
server.pem. However, the c2s and s2s connections to the domainexample.comuse the fileexample_com.pem. -
Port 5222 listens for c2s connections with STARTTLS, and also allows plain connections for old clients.
-
Port 5223 listens for c2s connections with the old SSL.
-
Port 5269 listens for s2s connections with STARTTLS. The socket is set for IPv6 instead of IPv4.
-
Port 3478 listens for STUN requests over UDP.
-
Port 5280 listens for HTTP requests, and serves the HTTP-Bind (BOSH) service.
-
Port 5281 listens for HTTP requests, using HTTPS to serve HTTP-Bind (BOSH) and the Web Admin as explained in Managing: Web Admin. The socket only listens connections to the IP address 127.0.0.1.
hosts:
- example.com
- example.org
- example.net
certfiles:
- /etc/ejabberd/server.pem
- /etc/ejabberd/example_com.pem
listen:
-
port: 5222
module: ejabberd_c2s
access: c2s
shaper: c2s_shaper
starttls: true
max_stanza_size: 65536
-
port: 5223
module: ejabberd_c2s
access: c2s
shaper: c2s_shaper
tls: true
max_stanza_size: 65536
-
port: 5269
ip: "::"
module: ejabberd_s2s_in
shaper: s2s_shaper
max_stanza_size: 131072
-
port: 3478
transport: udp
module: ejabberd_stun
-
port: 5280
module: ejabberd_http
request_handlers:
/bosh: mod_bosh
-
port: 5281
ip: 127.0.0.1
module: ejabberd_http
tls: true
request_handlers:
/admin: ejabberd_web_admin
/bosh: mod_bosh
s2s_use_starttls: optional
outgoing_s2s_families:
- ipv4
- ipv6
outgoing_s2s_timeout: 10000
trusted_proxies: [127.0.0.1, 192.168.1.11]
In this example, the following configuration defines that:
-
c2s connections are listened for on port 5222 (all IPv4 addresses) and on port 5223 (SSL, IP 192.168.0.1 and fdca:8ab6:a243:75ef::1) and denied for the user called ‘
bad’. -
s2s connections are listened for on port 5269 (all IPv4 addresses) with STARTTLS for secured traffic strictly required, and the certificates are verified. Incoming and outgoing connections of remote XMPP servers are denied, only two servers can connect: “jabber.example.org” and “example.com”.
-
Port 5280 is serving the Web Admin and the HTTP-Bind (BOSH) service in all the IPv4 addresses. Note that it is also possible to serve them on different ports. The second example in section Managing: Web Admin shows how exactly this can be done. A request handler to serve MQTT over Websocket is also defined.
-
All users except for the administrators have a traffic of limit 1,000Bytes/second
-
The
AIM transportaim.example.orgis connected to port 5233 on localhost IP addresses (127.0.0.1 and ::1) with password ‘aimsecret’. -
The ICQ transport JIT (
icq.example.organdsms.example.org) is connected to port 5234 with password ‘jitsecret’. -
The
MSN transportmsn.example.orgis connected to port 5235 with password ‘msnsecret’. -
The
Yahoo! transportyahoo.example.orgis connected to port 5236 with password ‘yahoosecret’. -
The
Gadu-Gadu transportgg.example.orgis connected to port 5237 with password ‘ggsecret’. -
The
Jabber Mail Componentjmc.example.orgis connected to port 5238 with password ‘jmcsecret’. -
The service custom has enabled the special option to avoiding checking the
fromattribute in the packets send by this component. The component can send packets in behalf of any users from the server, or even on behalf of any server.
acl:
blocked:
user: bad
trusted_servers:
server:
- example.com
- jabber.example.org
xmlrpc_bot:
user:
- xmlrpc-robot@example.org
shaper:
normal: 1000
shaper_rules:
c2s_shaper:
- none: admin
- normal
access_rules:
c2s:
- deny: blocked
- allow
xmlrpc_access:
- allow: xmlrpc_bot
s2s:
- allow: trusted_servers
certfiles:
- /path/to/ssl.pem
s2s_access: s2s
s2s_use_starttls: required_trusted
listen:
-
port: 5222
module: ejabberd_c2s
shaper: c2s_shaper
access: c2s
-
ip: 192.168.0.1
port: 5223
module: ejabberd_c2s
tls: true
access: c2s
-
ip: "FDCA:8AB6:A243:75EF::1"
port: 5223
module: ejabberd_c2s
tls: true
access: c2s
-
port: 5269
module: ejabberd_s2s_in
-
port: 5280
module: ejabberd_http
request_handlers:
/admin: ejabberd_web_admin
/bosh: mod_bosh
/mqtt: mod_mqtt
-
port: 4560
module: ejabberd_xmlrpc
access_commands: {}
-
ip: 127.0.0.1
port: 5233
module: ejabberd_service
hosts:
aim.example.org:
password: aimsecret
-
ip: "::1"
port: 5233
module: ejabberd_service
hosts:
aim.example.org:
password: aimsecret
-
port: 5234
module: ejabberd_service
hosts:
icq.example.org:
password: jitsecret
sms.example.org:
password: jitsecret
-
port: 5235
module: ejabberd_service
hosts:
msn.example.org:
password: msnsecret
-
port: 5236
module: ejabberd_service
password: yahoosecret
-
port: 5237
module: ejabberd_service
hosts:
gg.example.org:
password: ggsecret
-
port: 5238
module: ejabberd_service
hosts:
jmc.example.org:
password: jmcsecret
-
port: 5239
module: ejabberd_service
check_from: false
hosts:
custom.example.org:
password: customsecret
Note, that for services based in jabberd14 or WPJabber you have to make the transports log and do XDB by themselves:
<log id='logger'>
<host/>
<logtype/>
<format>%d: [%t] (%h): %s</format>
<file>/var/log/jabber/service.log</file>
</log>
```
<!--
Some XMPP server implementations do not provide
XDB services (for example, jabberd2 and ejabberd).
xdb_file.so is loaded in to handle all XDB requests.
-->
``` xml
<xdb id="xdb">
<host/>
<load>
<!-- this is a lib of wpjabber or jabberd14 -->
<xdb_file>/usr/lib/jabber/xdb_file.so</xdb_file>
</load>
<xdb_file xmlns="jabber:config:xdb_file">
<spool><jabberd:cmdline flag='s'>/var/spool/jabber</jabberd:cmdline></spool>
</xdb_file>
</xdb>